TerraSAR-X active radar ground calibrator system

In April 2006, the TerraSAR-X satellite was launched. This paper describes the development of a novel and highly integrated, digitally-controlled active SAR system calibrator (DARC). It consists of both an active transponder path for absolute radiometric calibration and a calibrated receiver chain for antenna pattern evaluation of the satellite antenna. A total of 16 active transponder and receiver systems and 17 receiver-only systems will be fabricated for a calibration campaign in 2006.     

James Webb Space Telescope: Project Overview

The James Webb Space Telescope (JWST) project at the NASA, Goddard Space Flight Center (GSFC) is responsible for the development, launch, flight, and science operations for the telescope. The project is in phase B with its launch scheduled for no earlier than June 2013. The project is a partnership among NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA). The JWST mission team is fully in place, including major ESA and CSA subcontractors. This provides an overview of the planned JWST science, current architecture focusing on the instrumentation, and mission status, including technology developments, and risks.     

机场建设"一市多场"模式研究

随着“一市一场”模式下的单机场在修建若干跑道后仍不能满足城市对机场的要求,修建第2座机场势在必行。借鉴国外大都市“一市多场”建设的成功经验,结合国内机场建设的实际情况,提出了构建“一市多场”的基本标准,即地方经济指标、运量指标、容量分配指标和航空公司选择指标4项标准,基于这4项标准分析了在实行“一市多场”过程中可能出现的及要实现该模式下机场的最优化配置应注意的问题,并以上海“一市两场”的模式为案例进行实证分析。     

Synthetic-aperture radar processing using fast factorized back-projection

Exact synthetic aperture radar (SAR) inversion for a linear aperture may be obtained using fast transform techniques. Alternatively, back-projection integration in time domain can also be used. This technique has the benefit of handling a general aperture geometry. In the past, however, back-projection has seldom been used due to heavy computational burden. We show that the back-projection integral can be recursively partitioned and an effective algorithm constructed based on aperture factorization. By representing images in local polar coordinates it is shown that the number of operations is drastically reduced and can be made to approach that of fast transform algorithms. The algorithm is applied to data from the airborne ultra-wideband CARABAS SAR and shown to give a reduction in processing time of two to three orders of magnitude.     

Almost instant time inference for hybrid partially dynamic Bayesian networks

A Bayesian network (BN) is a compact representation for probabilistic models and inference. They have been used successfully for many military and civilian applications. It is well known that, in general, the inference algorithms to compute the exact a posterior probability of a target node given observed evidence are either computationally infeasible for dense networks or impossible for general hybrid networks. In those cases, one either computes the approximate results using stochastic simulation methods or approximates the model using discretization or a Gaussian mixture model before applying an exact inference algorithm. This paper combines the concept of simulation and model approximation to propose an efficient algorithm for those cases. The main contribution here is a unified treatment of arbitrary (nonlinear non-Gaussian) hybrid (discrete and continuous) BN inference having both computation and accuracy scalability. The key idea is to precompile the high-dimensional hybrid distribution using a hypercube representation and apply it for both static and dynamic BN inference. Since the inference process essentially becomes a combination of table look-up and some simple operations, the method is shown to be extremely efficient. It can also he scaled to achieve any desirable accuracy given sufficient preprocessing time and memory for the cases where exact inference is not possible     

A method for constructing an airfoil using a specified chord velocity diagram

A problem of determining a shape of the airfoil being streamlined by a potential incompressible inviscid flow is solved by the successive approximation method using a specified chord velocity diagram. It is shown that a closed airfoil that possesses a specified chord velocity diagram can be constructed with a sufficient accuracy; if the chord diagram is unsuccessfully specified, the closed airfoil may prove to be not univalent, that is, physically unrealizable.     

Recent Breakthroughs in RF Photonics for Radar Systems

Radar systems require transmission of very high purity signals. Photonics is now mature enough to achieve analog transmission with very low noise, strong immunity, and wide-bandwidth even in harsh environments. We present our recent developments of optimized optical links dedicated to radar and multifunction systems     

Two Methods of Spectral Estimation for SARSAT Signals

Search and rescue satellite aided tracking (SARSAT) depends on the processing of emergency locator transmitter (ELT) signals which are received by a satellite in low polar orbit. Since the signal from a distressed vehicle is normally immersed in a background of other ELT signals (false alarms), interference, and noise, different methods of spectral estimation can provide advantages in estimating carrier frequency. A comparison between average spectrum and minimum spectrum for several real signals is provided here.     

Spiral evolution applied to legacy avionics systems

The US Department of Defense (DoD), through the Office of the Secretary of Defense (OSD), has determined that evolutionary acquisition is their strategy of choice for future software-intensive systems, and that the spiral development model (SDM) is the preferred method/process for software-intensive development life cycles. Electronic Systems Command (ESC) at Hanscom AFB, Massachusetts, has written a draft handbook on the use of Spiral Development for all future Command and Control (C2) systems, including reference to the DoD 5000 series and Air Force Program Directive 63-1, Acquisition System, which deploys this OSD mandate for future C2 systems. Barry Boehm's continued work on SDM which he conceived in the 1980s, is heavily biased toward development of new systems that are software-intensive, as noted in a workshop he gave at the Software Engineering Institute (SEI) in 2000.     

Airborne radar: its beginnings in World War II

Although not realized at the time, the defeat of the German Air Force in the summer of 1940 was one of the crucial battles of World War II. The narrow margin of victory can be ascribed to Britain's air-warning radar, Chain Home (CH), consisting of the 15-meter CH and the 1.5-meter CHL. The skillful use of this equipment by the Royal Air Force made daylight bombing unsustainable; the Luftwaffe then turned to night attacks, generally called "The Blitz." These were not effective in destroying military and industrial targets and depended on the hope of reducing the population's will to fight. Chain Home was of little use except to observe the attackers arrival, as it had almost no ability to follow the attackers as they proceeded inland. This eventuality was reckoned with before the outbreak of hostilities and had called for radars mounted in night fighters capable of guiding the pilot close enough to the target for him to open fire visually. The electronic techniques used at 1.5-meters were adapted to planes capable of carrying the radar and its operator. But there were three important design constraints: 1) the antennas had to be restricted to sizes that were practical for installation on aircraft, which for meter waves gave them low gain and large side lobes; 2) the set's maximum range was limited by the fighter's altitude as a result of the huge ground returns from the side lobes. British antiaircraft artillery, the stepchild of their arms, was too ineffective to drive the bombers to extreme altitudes; and 3) a minimum range had to be held until the flier could see his target, which strained the pulse techniques of the time.